下面的內容是對于高壓共軌噴油器試驗臺的使用注意事項闡述，所展示的噴油泵試驗臺都是現場拍攝，提供的內容都是經過泰安市泰山區精達動力機械制造廠高壓共軌試驗臺廠家經驗所得，請點擊進入查看更多液壓泵試驗臺的相關行業信息吧。

該款電噴高壓（可含中壓共軌）噴油器檢測試驗臺是我公司2020新研發的柴油高壓共軌噴油器及可增加HEUI機油促動卡特C7C9 C-9等噴油器測試功能試驗臺，采用全新BOSCHCP3.3共軌油泵提供高壓源，高壓共軌噴油器試驗臺內置3100余種共軌噴油器的標準數據，可檢測歐三歐四歐五（壓電陶瓷式噴油器）國六等標準電噴油嘴，設備具備高壓清洗功能采用高精度傳感器自動檢測全負荷、怠速、預噴射等各工況下的噴油量和回油量，并可檢查噴油器響應時間測試QR碼校驗功能，是檢測電噴柴油高壓共軌噴油器理想試驗設備。

主要功能：

1、變頻驅動共軌油泵產生全負荷工況240MPa的壓力

2、軌壓自動閉環控制，顯示精度0.1MPa

3、內置共軌噴油器標準數據庫，免費升級，用戶也可以自由添加數據

4、共軌噴油器標準數據庫配備各型號噴油器的控制波形數據，向噴油器輸出標準控制波形信號

5、可檢測博世、卡特，電裝、德爾福、西門子等各品牌高壓及可增加中壓共軌HEUI（機油））共軌噴油器功能。

6、工業電腦主板，嵌入式windows XP操作系統

7、噴油量和回油量系統及流量傳感器自動測量，屏幕顯示。

8、可生成測試數據報表，可以存儲和打印（可選）

9、啟動油量檢測。

10、高壓共軌噴油器試驗臺檢測共軌噴油器開啟壓力

11、檢測共軌噴油器的密封性

12、檢測共軌噴油器怠速工況

13、檢測共軌噴油器全負荷工況

14、檢測共軌噴油器啟動工況和回油量。

15、檢測共軌噴油器預噴射工況

16、檢測共軌噴油器高壓沖洗功能

17、檢測共軌噴油器霧化質量

參數：

1．輸出功率：5.5KW

2．電機轉速范圍：0--2000rpm

3．溫度控制范圍：40±2℃

4．噴油器驅動電流：28A

5．噴油器測試持續時間：100--3000μs

6．工作壓力調節范圍：0--2500Bar．

7．壓力控制精度：±0.5Mpa

8．流量測量范圍：0--600ml／1000次

9．流量測量精度：0.01ml

10．溫度冷卻方式：水冷或風冷。

This EFI high-pressure (including medium pressure common rail) injector test bench is a new diesel high-pressure common rail injector developed by our company in 2020 and an injector test function test bench that can add HEUI oil to actuate Carter c7c9 C-9 and other injectors. The new boschcp3.3 common rail oil pump is used to provide high-pressure source, and the high-pressure common rail injector test bench has built-in standard data of more than 3100 common rail injectors, It can detect the European three European four European five (piezoelectric ceramic injector) national six standard electric fuel injector. The equipment has the function of high-pressure cleaning. It uses high-precision sensors to automatically detect the fuel injection and return volume under full load, idle speed, pre injection and other working conditions, and can check the response time of the fuel injector. It can test the QR code verification function. It is an ideal test equipment for detecting the high-pressure common rail fuel injector of EFI diesel.

Main functions:

1. The frequency conversion drive common rail oil pump produces a pressure of 240mpa under full load condition

2. Rail pressure automatic closed-loop control, display accuracy 0.1MPa

3. Built in common rail injector standard database, free upgrade, users can also add data freely

4. The common rail injector standard database is equipped with the control waveform data of each type of injector and outputs the standard control waveform signal to the injector

5. It can detect the high pressure of Bosch, Carter, Denso, Delphi, Siemens and other brands, and can add the function of medium pressure common rail HEUI (oil)) common rail injector.

6. Industrial computer motherboard, embedded Windows XP operating system

7. The fuel injection quantity and return quantity system and flow sensor automatically measure and display on the screen.

8. Test data report can be generated, and can be stored and printed (optional)

9. Start the oil quantity detection.

10. High pressure common rail injector test bench detects the opening pressure of common rail injector

11. Check the sealing of common rail injector

12. Check the idling condition of common rail injector

13. Check the full load condition of common rail injector

14. Check the starting condition and fuel return volume of common rail injector.

15. Detect the pre injection condition of common rail injector

16. Test the high-pressure flushing function of common rail injector

17. Test the atomization quality of common rail injector

Parameters:

1. Output power: 5.5kw

2. Motor speed range: 0--2000rpm

3. Temperature control range: 40 ± 2 ℃

4. Fuel injector driving current: 28a

5. Fuel injector test duration: 100--3000 μ s

6. Working pressure adjustment range: 0--2500bar

7. Pressure control accuracy: ± 0.5MPa

8. Flow measurement range: 0--600ml / 1000 times

9. Flow measurement accuracy: 0.01ml

10. Temperature cooling mode: water cooling or air cooling.

英文由百度翻譯，僅供參考。